Ce Approved Hot Air Laboratory Vacuum Oven for Drying

<

Model NO.: CT
Trademark: changgan
Transport Package: Wood Case
Specification: CE
Origin: China
HS Code: 8419399090

Ce Approved Hot Air Laboratory Vacuum Oven for Drying
Application
Vacuum dryer is suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose at high temperature. It is wide used in pharmaceutical, chemical, foodstuff and electronic industries.

Principle of work
It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying. If use vacuum to take air and humidity out, the dry speed will be faster.

Note: If use condensator, the solvent in raw material can be recovered. If use SK series water ring vacuum pump or ZSWJ series hydraulic inject vacuum pump sets, condensator can not be used and the investment could be saved.

Features
Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporator can be saved;
The heat source for operation of evaporation may be Iow pressure steam or surplus heat steam;
The heat loss of evaporator is less;
Before drying, the treatment of disinfection may be.
Name\specification YZG-600 Φ×L YZG-800 Φ×L YZG-1000 Φ×L YZG-1400 Φ×L FZG-15 L×W×H
inside size of chamber (mm) 600×976 800×1274 1000×1527 1400×2054 1500×1400×1200
size of chamber (mm) 1153×810×1020 1700×1040×1335 1693×1190×1500 2386×1657×1920 1513×1924×2060
layers of baking shelf 4 4 6 8 8
layer of baking shelf (mm) 81 82 102 102 122
size of baking shelf (mm) 310×600×45 460×600×45 460×640×45 460×640×45 460×640×45
number of baking disk 4 8 12 32 32
permitted pressure inside the pipe of baking shell(Mpa) ≤0.784(8kgf/cm 2 ) ≤0.784 ≤0.784 ≤0.784 ≤0.784
temperature inside chamber() ≤150 ≤150 ≤150 ≤150 ≤150
vacuum in idle inside chamber ≤30
when vacuum is 30 torr and the heating temperature is 1100C,vaporized rate of water(kg/m 2. h) 7.2
if use condensator,type and power of vacuum pump(kw)   2X-15A 2kW 2X-30A 3kW W3 5.5kW W3 7.5kW 2X-70A 7.5kW
if not use condensator,type and power of vacuum pump(kw) SK-0.8 2.2kW SK-3 5.5kW SK-3 5.5kW SK-3 7.5kW SK-3 7.5kW
weight of drying chamber(kg) 250 600 800 1000 2100

Main Features of thick film heating technology 

1. Electric Circuit printed on stainless steel tube surface, to heating the water flow inside. 5 isolation layers sintered on the surface.
2. Large heat transfer area on tube surface; Ramp up and Cool down quickly; High utilization rate up to 93% or above.
3. Fast temperature response, power density is as high as 60W/cm² and heating circuit`s temperature raising rate exceeds 80℃/s.

4. Simple structure, compact profile, various applications



Thick Film Chart

And on the basis of Thick Film Heating Element, we develope stainless steel welding interface Heating Element with large power, which is most suitable for commercial vending machine, such as commercial coffee maker, tea maker and juice maker. 


Large Power Heating Element


40Mm Stainless Steel Welding Heater

40Mm Stainless Steel Welding Heater,Post Weld Treatment,Welding Procedure,Preheating In Welding

XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de