Hand Operate Oil Lubrication Pump

<

Model NO.: JYS-09-35
Warranty: 1 year
Trademark: No Brand
Transport Package: Carton Box
Specification: Pump body diameter 120mm
Origin: China
HS Code: 84312000
 JYS-09-35
Round Wp25# Inlet 32mm
Material   Outlet 25mm
Pump body diameter 125mm Qty 10pcs
Lift 5m Inner box 36*15.5*13.8cm
Suction 1m Carton box 82*37*29cm
Rotation 70r/min G.W./N W.: 20/19kg
Flow 24L    

Operation:
1. Insert the standpipe into the bung of the barrel, then thread the lower part of the bung adapter onto the bung — hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump, rotate the handle clockwise to begin the flow of fluid.
Use Attention:
1. We recommend using this pump for dispensing oil, gasoline, kerosene, diesel fuel, and low-viscosity oil only.
2. Hand rotation direction should follow the arrow on the main engine (pump part) for proper operation.
3. If used incorrectly with drugs, saline, etc., clean the pump body immediately with lamp oil to prevent damage.
4. Choose a safe location away from rain, dew, sunlight, and fire hazards, following fire safety regulations.
5. The manufacturer is not responsible for any injuries or accidents caused by improper use or failure to follow instructions.
6. Unauthorized modifications or improper usage may result in malfunctions or accidents, and the manufacturer will not be liable.
This hand pump is suitable for various conditions, as long as the oil being extracted does not freeze.
   7.Do not extract water, acid, or alkali chemical solutions.
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump

Indoor Decoration Rock Plate Adhesive

Indoor Decoration Rock Plate Adhesive,Indoor Decoration Rock Plate Glue,Indoor Decoration Rock Plate Sealant

Shandong Tongchuang Rubber Industry Co.,Ltd. , https://www.tcadhesive.com