Shanghai Xinnuo Instrument Gas Turbine Flowmeter is a commonly used flow measurement instrument with the advantages of stable performance, flexible use, high reliability and easy maintenance. Users need to pay more attention when choosing a gas turbine flow meter. Specifically, we will introduce the selection method of gas turbine flowmeters. We hope to help everyone.

First, the accuracy level. Turbine flow sensors generally have higher accuracy levels. In general, the higher the accuracy, the more sensitive the field environment is. From the economic benefits above, do not blindly pursue a high level of accuracy. For large-diameter flow applications, such as the West-East Gas Pipeline project, high-precision sensors must be selected, and for the occasion where the delivery volume is small and metering is required, general turbine flow sensors can be selected.

Second, gas density. The stability of the gas density has a great influence on the measurement accuracy of the turbine flow sensor. For applications where the density is often changed, the flow coefficient needs to be modified in a way that is especially suitable for low flow areas.

Third, the flow range. The choice of the flow range of the turbine flow sensor directly affects its accuracy and useful life, and it also determines the choice of flow sensor aperture. Select the flow range generally in accordance with the following guidelines: Minimum flow should be greater than or equal to the instrument can measure the minimum flow, the maximum flow should be less than equal to the meter can measure the maximum flow; For uninterrupted work is less than eight hours, the maximum flow should be the actual maximum flow About 1.3 times of the time; For uninterrupted work more than eight hours, the maximum flow rate should be more than 1.4 times the actual maximum flow rate; the minimum flow rate should be 0.8 times the actual minimum flow rate is better.

Fourth, pressure loss. The smaller the pressure loss, the smaller the energy consumption of the gas during the flow, which can save energy, reduce transportation costs, and improve utilization. So when choosing, try to choose a turbine flow sensor with low pressure loss. In general, the turbine flow sensor using the semi-ellipsoidal front deflector has less pressure loss than the turbine flow sensor of the front deflector of the cone.

Fifth, the structure. The structure is determined by the above three methods: The internal structure is best to use the reverse push turbine flow sensor, because the structure can make the impeller in a floating state within a certain flow range, there is no contact point in the axial direction, no end surface friction and wear, Extend the service life of the bearing; For the flow sensor installed in the horizontal structure, it can be connected to the pipeline by flange connection, screw connection, and clamp connection; for the vertical structure, the flow sensor can only be connected by thread.

The correct selection of gas turbine flow sensors not only relates to the accuracy of gas metering, but also prolongs the service life of the sensors and saves maintenance costs.

 

Aggregate Batching Plants

This station is suitable for industrial, civil construction, roads, railways, bridges, electric power, water conservancy, port terminals, airports and other projects. It can be used as a mixing equipment for commercial concrete production, and combined various forms different specifications concrete mixing plant according to the needs of different users.

Automatic Batching Machines,Weigh Batching Machine,Material Batching Machine,Aggregate Concrete Batching Machine

Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.sdmobileconcretebatchingplant.com