Huifeng Wear Resistant built
joint venture with Vautid GmbH manufacturing comprehensive Flux Cored Welding
Wire and Electrode as an professional wear solution provider.
We offer welding wires for low,
medium and high alloy hardfacing, for mild steel fabrications, Diameters range from
1.2 mm to 4.0 mm, using our own manufacturing technology. In addition to cored
wires, our range of consumables includes tubular welding electrodes.
HP Welding manufactures an extensive
range of flux cored and metal cored hardfacing consumables. We offer
welding wires for low, medium and high alloy hardfacing, which provide the
ultimate protection against various types of wear, including abrasion, impact,
mechanical fatigue, and more.
Our
range of hardfacing welding wires dedicated to increasing abrasion resistance.
Flux cored wires and metal cored wires suitable for increasing wear resistance
of parts such as screw conveyors, fans, equipment used in agriculture &
mining, grinding mills, vertical mills, screws, blades, ventilators, screw conveyors, riddles for hot materials, fans,
crushers and more.
HP Welding manufactures a range
of flux cored welding wire and metal cored welding wire for different
cladding applications to increase wear resistance. With our cladding wires, you
will prevent wear problems from abrasion, impact, temperature, and increase the
service life of your parts.
HP
Welding wire could make the ultra-hard deposit offering extremely high
resistance to abrasion under high stresses and moderate impacts
HP
Welding wire forms the ultra-hard deposit offering highest resistance to
abrasion which contains boron carbides of extreme hardness
HP
Flux Cored Wire Spec data, Chemicals and Applications
Item
Chemicals
Hardness (HRc)
Application
C
Si
Mn
Cr
Mo
B
Others
Fe
HP-280Mo
4.5
0.8
0.6
28
1
Balance
58~62
Coal Mill; Vertical
Mill
HP-280
4.5
0.8
0.6
28
Ni:0.15
Balance
58~62
HP-252B
5
0.8
0.6
25
0.38
Balance
58~62
HP-252B+
5
0.8
0.6
25
0.7
Balance
59~64
Wear Plate
HP-1996
0.08
0.8
6.5
19.8
Ni:9
Balance
HB180-220
Buffer layer
HP-250
0.11
0.5
1.5
1.1
0.25
Balance
24-32
Welding Recondition
Backing weld
HP-265
5
0.7
0.5
22
Nb:7
Balance
61-64
Slag Mill;
Hardfacing Enhancement Layer
Niobium Carbide Welding Wire,Molybdenum Carbide Welding Wire,Tungsten Carbide Welding Wire,Hardfacing Electrode,Alloy Welding HuiFeng Wear Resistant Group , https://www.hpwearsolution.com
Micro Magnetic Drive 12V DC Hot Water Circulation Small Fountain Amphibious Pump
**Micro Magnetic Drive 12V DC Hot Water Circulation Small Fountain Amphibious Pump**
**Parameter:**
| Model | Rated Voltage (V) | Power Consumption (W) | Max Lift (M) | Max Flow Rate (L/H) | Dimension (MM) | Diameter of Outlet (MM) | Net Weight (KG) |
|-------------|-------------------|------------------------|--------------|----------------------|--------------------|--------------------------|------------------|
| WIN-140405 | 12 | 14.4 | 5 | 450 | 90*46.4*67.2 | 10 | 0.27 |
**Specifications:**
1. Dimensions: 90mm x 46.4mm x 67.2mm
2. Weight: 270g
3. Outlet dimension: 10mm
4. Inlet dimension: 14mm
5. Pump body material: PA66 + 30% GF
6. Max loading current: Rated current ± 0.1
7. Types of fluids: Water, oil, acid-base solutions (according to test results)
8. Fluid working temperature: -10°C to 50°C (fluid should be kept from freezing)
9. Working environment temperature: -10°C to 50°C
10. Storage temperature: -10°C to 50°C
11. Noise level: <40dB (while pumping water)
12. Water proof level: IP68 (submersible)
13. Power supply: Solar power, battery, adapter, battery module
14. Life expectancy: More than 20,000 hours
**Features:**
1. Compact design, high efficiency, long lifespan, and low noise level.
2. Ceramic shaft with carbon graphite seal for low friction.
3. Non-conformity rate: Less than 0.5%.
4. Brushless motor with electronic commutator, no mechanical wear.
5. Electric and fluid are insulated from each other, sealed with epoxy for 100% waterproof and leak-proof performance.
**Contact me if you have any questions about the product!**
**Pictures:**
**Dimension & Curve:**
**Why Choose Us?**
1. **Quality Control:** We ensure top-quality products through strict supplier evaluations, in-coming inspections, in-process checks, final inspections, and pre-delivery testing. Our goal is continuous improvement based on customer feedback.
2. **OEM Ability:** We offer ODM, OEM, and agent services worldwide, building strong and long-term relationships with supermarkets.
3. **Parts Available:** We keep spare parts in stock for immediate delivery globally. Our pumps come with more optional parts than most competitors.
4. **Good Warranty:** We provide reliable warranties and after-sales support, ensuring customer satisfaction and product quality.
**FAQ:**
1. **Q: Can I get samples from you?**
**A:** Yes, we are happy to provide samples for quality inspection.
2. **Q: What parts are manufactured by you?**
**A:** 80% of frame parts are made by us. Spare parts are sourced from China’s top 10 suppliers.
3. **Q: What's the lead time?**
**A:** 10 days for sample orders, 30 days for mass production (depending on quantity).
4. **Q: How long before goods arrive?**
**A:** 3–5 days via international express, 5–7 days via air, 35–40 days via sea.
5. **Q: Can you put my brand name/logo on the products?**
**A:** Yes, for container orders or sticker orders over 100 pcs.
6. **Q: What payment methods do you accept?**
**A:** T/T, L/C, Western Union, MoneyGram, etc.
7. **Q: What certificates do you have?**
**A:** CE and ISO certifications are available for all products. For some models, we can assist with certificate applications.
8. **Q: What is your product quality?**
**A:** We source materials from qualified suppliers and maintain a strong quality control team. We care about what you care about.
9. **Q: What is your warranty?**
**A:** 24 months after delivery. We focus on excellent after-sales service.
10. **Q: How are parts availability?**
**A:** We keep spare parts in stock and ensure they are always available when needed.