Myanmar OEM Multistage Centrifugal Water Pump Details Myanmar OEM horizontal multistage centrifugal pump D25-30x5 Material: ductile iron body,stainless steel impellers,40Cr shaft,NSK bearings with jaw coupling & common baseplate, Flow: 25 cbm/h Head: 150m ,Speed 2950 r/min,inlet diameter 65 mm and outlet diameter 65 mm Seal: packing Suggested Motor: TEFC air-cooled squirrel cage,3 phase asynchronous motor. Y series common motor and variable-frequency  and variable-speed motor,380V, 50Hz ,22kw Application: Horizontal multistage centrifugal pumps usually are applied in power station, mining, industry, waste water treatment, seawater RO system, water supply, steel factory etc Production process: Casting + As-cast + CNC processing + Parts test (Vision inspection + Dimensional measurement + Impeller static equilibrium test) + casings installation and pressure test + Rotor installation and dynamic balance test + Pump installation + mechanical seal test + Deflection tester for the coupling assembly + Test bed testing + Painting + Packing + Shipment Nomenclature: D25-30x5 D means D types of horizontal multistage centrifugal pump for clean water 25 means the design point of capacity of the pump is 25 m3/h 30 means the design point of single-stage head is 30 m 5 means the pump stage is 5 which also means it has 5 impellers.  Structure Chart of Myanmar OEM Multistage Centrifugal Water Pump  What is a multistage pump?  A multistage pump is a pump that contains different stages within the piping system where force is applied to the water. Each stage consists of one impeller as well as its accompanying diffusion components. The term "multistage" is usually used in reference to centrifugal pumps.  In many cases, these pumps are referred to in terms of how many stages they contain. For example, a pump with four stages might be referred to as a four-stage pump, or one with 10 stages would be referred to as a ten-stage pump. D types of Multistage Centrifugal Water Pumps are single suction, horizontal segmental multistage pumps with level inlet entrance and vertical outlet. Usually they can connect with submersible pump and vacuum pump to increase the suction head lift. Compare to the other kind of pumps, they are cheaper and with high head, large capacity.  Myanmar OEM Multistage Centrifugal Water Pump Performance Curve and Parameters: As a professional manufacturer of horizontal multistage centrifugal pumps, we can produce different types of pump according to the application. We have D,DF,DY,MD,DG series of traditional multistage centrifugal pump; D(P), DF(P), DY(P), MD(P) DG(P)series of self balancing multistage centrifugal pump.  Usually D/D(P) types of multistage centrifugal pump used for transmission of water free of solid particles and temperature below 80ºC, or similar physical and chemical liquid. Suitable for mining, mill and city water supply and drainage.  DF/DF (P) types of multistage centrifugal pump are used for transmission of corrosive liquid with temperature range of -20ºC ~ 105ºC and non-solid particles. We will produce according to the gravity, density, working temperature and the suction pressure of the fluid.  DY/DY (P) types of multistage centrifugal pump used for transmission of non-solid oily liquid and petroleum product with temperature range of -20ºC ~ 105ºC and viscosity less than 120cst.  MD/MD (P) types of multistage centrifugal pump used for transmission of neutral liquid from mining well or other similar liquid. The density and size of the particles of the sewage shall be less than 1.5% and 0.5mm respectively. The temperature range of the sewage shall be -20ºC ~ 80ºC.  DG/DG (P) types of multistage centrifugal pump used for low and medium pressure hot water transmission, also named as boiler feed pump. Temperature ranges from -20ºC ~ 150ºC. All the max suction pressure shall be 0.6Mpa.   Myanmar OEM Multistage Centrifugal Water Pump Details Myanmar OEM horizontal multistage centrifugal pump D25-30x5 Material: ductile iron body,stainless steel impellers,40Cr shaft,NSK bearings with jaw coupling & common baseplate, Flow: 25 cbm/h Head: 150m ,Speed 2950 r/min,inlet diameter 65 mm and outlet diameter 65 mm Seal: packing Suggested Motor: TEFC air-cooled squirrel cage,3 phase asynchronous motor. Y series common motor and variable-frequency  and variable-speed motor,380V, 50Hz ,22kw Application: Horizontal multistage centrifugal pumps usually are applied in power station, mining, industry, waste water treatment, seawater RO system, water supply, steel factory etc Production process: Casting + As-cast + CNC processing + Parts test (Vision inspection + Dimensional measurement + Impeller static equilibrium test) + casings installation and pressure test + Rotor installation and dynamic balance test + Pump installation + mechanical seal test + Deflection tester for the coupling assembly + Test bed testing + Painting + Packing + Shipment Nomenclature: D25-30x5 D means D types of horizontal multistage centrifugal pump for clean water 25 means the design point of capacity of the pump is 25 m3/h 30 means the design point of single-stage head is 30 m 5 means the pump stage is 5 which also means it has 5 impellers.  Structure Chart of Myanmar OEM Multistage Centrifugal Water Pump  What is a multistage pump?  A multistage pump is a pump that contains different stages within the piping system where force is applied to the water. Each stage consists of one impeller as well as its accompanying diffusion components. The term "multistage" is usually used in reference to centrifugal pumps.  In many cases, these pumps are referred to in terms of how many stages they contain. For example, a pump with four stages might be referred to as a four-stage pump, or one with 10 stages would be referred to as a ten-stage pump. D types of Multistage Centrifugal Water Pumps are single suction, horizontal segmental multistage pumps with level inlet entrance and vertical outlet. Usually they can connect with submersible pump and vacuum pump to increase the suction head lift. Compare to the other kind of pumps, they are cheaper and with high head, large capacity.  Myanmar OEM Multistage Centrifugal Water Pump Performance Curve and Parameters: As a professional manufacturer of horizontal multistage centrifugal pumps, we can produce different types of pump according to the application. We have D,DF,DY,MD,DG series of traditional multistage centrifugal pump; D(P), DF(P), DY(P), MD(P) DG(P)series of self balancing multistage centrifugal pump.  Usually D/D(P) types of multistage centrifugal pump used for transmission of water free of solid particles and temperature below 80ºC, or similar physical and chemical liquid. Suitable for mining, mill and city water supply and drainage.  DF/DF (P) types of multistage centrifugal pump are used for transmission of corrosive liquid with temperature range of -20ºC ~ 105ºC and non-solid particles. We will produce according to the gravity, density, working temperature and the suction pressure of the fluid.  DY/DY (P) types of multistage centrifugal pump used for transmission of non-solid oily liquid and petroleum product with temperature range of -20ºC ~ 105ºC and viscosity less than 120cst.  MD/MD (P) types of multistage centrifugal pump used for transmission of neutral liquid from mining well or other similar liquid. The density and size of the particles of the sewage shall be less than 1.5% and 0.5mm respectively. The temperature range of the sewage shall be -20ºC ~ 80ºC.  DG/DG (P) types of multistage centrifugal pump used for low and medium pressure hot water transmission, also named as boiler feed pump. Temperature ranges from -20ºC ~ 150ºC. All the max suction pressure shall be 0.6Mpa.  Shine concrete mixers include JS series double shaft mixer, Sicoma mixers, Drum Concrete Mixer, BHS mixers and etc. Different volumes can meet different customers' requirements. At present , JS series double shaft mixer is the most frequently used mixer for Concrete Batching Plant ,for more smaller concrete Batching Plant , customers can choose drum mixer to reduce cost. And for big project , customers can choose Sicoma or BHS mixers to improve the usage life of mixer,but the cost will be higher. Concrete Mixer,Concrete Pan Mixer,Mobile Concrete Mixing Plant,Mobile Mix Plant Equipment SHANDONG SHINE MACHINERY CO.,LTD , https://www.shinebatchplant.com
Â
Stages
Capacities (cbm/h)
Head (m)
Speed (r/min)
Shaft Power (KW)
Motor Power (KW)
Efficiency
NPSHr (m)
Impeller Diameter (mm)
5
15
170
2950
13.89
22
50%
2.2
φ160
25
150
16.47
62%
2.2
30
137.5
17.83
63%
2.4
Our Service:
Hunan Jiahua Pumps Co., Ltd is a professional manufacturer of horizontal multistage centrifugal pumps.We've been in this field over 20 years and set the factory from year 2010.We are a sound brand in China and develops a lot of distributors and end users.Also we offer repairing and maitenance of horizontal multistage pumps with reasonable price.From year of 2018 we decided to export horizontal multistage centrifugal pumps directly as we had exported a lot through export agent companies.Our main markets are Southeast Asian, Middle East, African, South America at present and we are trying to apply CE, UL certifications to develop more markets in the future.
 
Pakaging:
Palywood case for Industrial Electric Multistage Centrifugal Pump
FAQ
Q1. What is your product range?
We can supply boiler water pump, Multistage centrifugal pump, clean water pump, sewage pump, chemical pump, oil pump, self priming pump, centrifugal submersible pump, single stage pump, industry pump etc.Â
Q2. Are you a manufacturer?
Yes, we are a professional manufacturer of horizontal multistage pumps over 20 years.
Q3. What information should I let you know if I want to get a quotation?
Please let us know pump flow capacity, pump head, medium, medium temperature, pump material, quantity, we will recommend relevant product.
Q4. Can you supply motor together?
Yes. We have cooperated factory. And most of the domestic customers require full set. But for foreign customers you can buy similar motor to avoid high custom duty if any.
Q5. What about your quality standard?
Under the ISO9001:2008 and China government standards of multi-stage centrifugal water pump.
Q6. What about the guarantee?
Strictly under the operation manual and routine maintenance and inspections, the guarantee is one year while the wearing parts 6 months.Self balancing multistage centrifugal pumps used for clean water can extend the guarantee period to 2 years.
Â
Stages
Capacities (cbm/h)
Head (m)
Speed (r/min)
Shaft Power (KW)
Motor Power (KW)
Efficiency
NPSHr (m)
Impeller Diameter (mm)
5
15
170
2950
13.89
22
50%
2.2
φ160
25
150
16.47
62%
2.2
30
137.5
17.83
63%
2.4
Our Service:
Hunan Jiahua Pumps Co., Ltd is a professional manufacturer of horizontal multistage centrifugal pumps.We've been in this field over 20 years and set the factory from year 2010.We are a sound brand in China and develops a lot of distributors and end users.Also we offer repairing and maitenance of horizontal multistage pumps with reasonable price.From year of 2018 we decided to export horizontal multistage centrifugal pumps directly as we had exported a lot through export agent companies.Our main markets are Southeast Asian, Middle East, African, South America at present and we are trying to apply CE, UL certifications to develop more markets in the future.
Â
Pakaging:
Palywood case for Industrial Electric Multistage Centrifugal Pump
FAQ
Q1. What is your product range?
We can supply boiler water pump, Multistage centrifugal pump, clean water pump, sewage pump, chemical pump, oil pump, self priming pump, centrifugal submersible pump, single stage pump, industry pump etc.Â
Q2. Are you a manufacturer?
Yes, we are a professional manufacturer of horizontal multistage pumps over 20 years.
Q3. What information should I let you know if I want to get a quotation?
Please let us know pump flow capacity, pump head, medium, medium temperature, pump material, quantity, we will recommend relevant product.
Q4. Can you supply motor together?
Yes. We have cooperated factory. And most of the domestic customers require full set. But for foreign customers you can buy similar motor to avoid high custom duty if any.
Q5. What about your quality standard?
Under the ISO9001:2008 and China government standards of multi-stage centrifugal water pump.
Q6. What about the guarantee?
Strictly under the operation manual and routine maintenance and inspections, the guarantee is one year while the wearing parts 6 months.Self balancing multistage centrifugal pumps used for clean water can extend the guarantee period to 2 years.
Myanmar OEM Electric Multistage Centrifugal Water Pump for Potable Water Service
Model NO.: D25-50x5
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: According to Pump Npshr
Impeller: Closed
Usage: Pump, Pumps, Circulating Pump
Product Name: OEM Electric Multistage Centrifugal Water Pump
Pump Style: Centrifugal Pump
Pump Material: Cast Iron,Ductile Iron,Cast Steel,SS304
Certificate: Ma,ISO
Guarantee: 1 Year
Trademark: Jiahua
Transport Package: Plywood Case
Specification: 2~12 stages
Origin: Hunan, China
HS Code: 8413709990
Model NO.: D25-50x5
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: According to Pump Npshr
Impeller: Closed
Usage: Pump, Pumps, Circulating Pump
Product Name: OEM Electric Multistage Centrifugal Water Pump
Pump Style: Centrifugal Pump
Pump Material: Cast Iron,Ductile Iron,Cast Steel,SS304
Certificate: Ma,ISO
Guarantee: 1 Year
Trademark: Jiahua
Transport Package: Plywood Case
Specification: 2~12 stages
Origin: Hunan, China
HS Code: 8413709990
Product Description
Product Description