Anhui Tiankang Group is located in the beautiful and prosperous East Pearl – Tianchang City, Anhui Province. Tiankang 's seismic pressure gauges have good anti-vibration performance and are especially suitable for working environments with mechanical vibration and medium pulsation. Seismic pressure gauges can measure the pressure or vacuum of media such as liquids, gases, and steam that are free of the danger of explosion, are free of crystals, do not freeze, and do not corrode copper alloys.

    To ensure Tiankang pressure gauge always in good technical condition, ready to be put into operation, Tiankang failure and the reasons put forward eight common table seismic pressure during operation:

First, the pointer jitter. Causes: 1. The pressure of the measured medium is large; 2. The installation position of the pressure gauge is greatly shaken.

Second, the pressure gauge has no indication. Causes: 1. The shut-off valve on the pressure guiding pipe is not open; 2. The pressure guiding pipe is blocked; 3. The dirt in the spring pipe joint is excessively deposited and blocked; 4. The spring pipe is cracked; 5. The center tooth and the fan tooth wear Too much to mesh.

Third, the pressure indication error is not uniform. Causes: 1. The spring tube fails to deform; 2. The free end of the spring tube and the sector gear are adjusted improperly.

Fourth, the pressure gauge pointer jump or sluggish phenomenon. Causes: 1. The pointer collided with the surface glass or scale; the center gear shaft was bent; 3. The two gears were contaminated; 4. The movable screw between the connecting rod and the fan gear was not flexible.

5. After the pressure is removed, the pointer cannot be restored to zero. Causes: 1. Pointer bending; 2. Short spring force; 3. Loose hands; 4. Drive gear has friction.

Sixth, the transmission ratio is misaligned.

Seven, the pressure gauge indicates low. Reasons: 1. Improper gear ratio; 2. Spring tube leaking; 3. Pointer or transmission mechanism has friction; 4. Pressure guiding pipeline leaks.

Eight, the pointer cannot indicate the upper limit scale. Reasons: 1. Small transmission ratio; 2. Improper positioning of the movement on the base; 3. Improper welding position of the spring tube.

For many years, the company has been honored with the honorary title of “Provincial Contract-stressed and Credit-keeping Advanced Enterprise” and “National Cable Exemption Inspection Product”. The products of the company have covered the electricity, petroleum, chemical, machinery, metallurgy, network communications, medical and health industries of all provinces and cities in the country. Unity, pragmatism, innovation and development are the eternal beliefs of Tiankang people. The trust of customers is the unremitting pursuit of Tiankang. The support of users is our success. We will devote ourselves to revitalizing the national industry and provide more satisfaction for our customers. product and service

 

 

 

 

 

 

Lights and Lighting

Lights And Lighting,Modern Led Desk Lamp,Energy Saving Table Lamp,Custom Led Floor Lamps

SHAOXING SUNSHINE ELECTRONIC CO.,LTD , https://www.ultralitelamp.com