Do It Yourself To Clean The Aerial Car Key Steps

<

Body Wash: Be sure to wash the dirt from the bodywork of the aerial vehicle and then use the car washes. Although the car wash sponge can absorb some sand particles, it still does not rule out the residual sand particles in the friction caused damage to the paint. After the car wash liquid is applied , You can wait a minute or so before you rinse it again to make the ingredients in your car wash work better.

Leather, upholstery parts: If there is slight stain, 3% solution of synthetic detergent for washing can be adhered to the cloth and gently scrubbed. When the stain is heavy, it can be properly cleaned with alcohol. The carpet is mainly cleaned by a vacuum cleaner. Foam cleaner for local cleaning.

Paint oil, shellac: should use a special car oil cleaner to wipe, the effect is very good. Do not use nail scraping or rub with a cloth to wipe, will leave scratches.

Wheel Washing: After washing with car washes, it must be rinsed with clean water to prevent the aging of the sidewalls of the working platform tires. After the snow, the tires and chassis should be washed immediately to remove the alkaline snow melting agent. After the wheel is washed in winter, the brakes should be dried as much as possible. 2. Release the handbrake on the plate and on the ground, otherwise it is easy to freeze the brake pads of the aerial vehicle.

Machinery Parts is namely machine parts, it is basic components of machine. 

Since the present of machine, the corresponding mechanical parts appear. But as also be a discipline, machinery parts separated from the mechanical structure and mechanics. With the development of mechanical industry, new design theory and method, new materials, new technology all appear one after another, then machinery parts entered a new stage of development. Theories such as finite element method and fracture mechanics, elastic hydrodynamic pressure lubrication, optimization design, reliability design, computer aided design (CAD), entity modeling (Pro, Ug, Solidworks, etc.), system analysis and design methodology has been gradually used in the research and design of machinery parts. Better combination of a variety of disciplines, combination of macro and micro to search new principle and structure, more dynamic and precise design, more efficient use of the electronic computer, the further development of design theory and method, is the important trend in the development of the discipline.

Machinery Parts

Machinery Parts,Aluminum Die Casting Machinery Parts,High Precision Machinery Parts,Machine Part

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , http://www.blcastings.com