The company combines the latest technology and foreign domestic chemical production optimization design, the most prominent feature of the new chemical pump is shortened impeller cantilever, bold shaft diameter; shell asymmetric cross-section of the volute, the pump shell mouth ring; Adopt imported bearings and new seal, equipped with international advanced single-stage double-end mechanical seal.

According to reports, this new chemical pump for chemical processes containing solid content of less than 30% of the slurry and the crystallization of impurities in the medium transport. Compared with the traditional chemical pump, the pump has the advantages of high efficiency of transporting the high viscosity medium, asymmetric cross-section volute reduces the impact loss of the fluid, increases the strength of the shaft, reduces the rotor deflection, and runs stably; improves the inlet design and improves Pump cavitation; long sealing life, advanced shaft seal, the sealing effect is better, reducing leakage; can not open the casing and the impeller to adjust the gap, reducing the maintenance time, saving maintenance costs .

Maximum load: 2000kg

Used to transfer materials overhead, our Light Girder Suspension Crane is especially suitable for use in workshop that have low ceilings as well as factories and sites made of lightweight steel frames where the bridge Crane reaches its limit.

The modular design contains fewer standard parts that make crane assembly as easy as stacking blocks. With these modular parts, users can reassemble a new crane, according to the change in lifting requirements of the alterations made to the workshop.

Due to the ultra-light weight of the crane, there is little friction between the trolley wheel and the rail. Easily moved by hands, this Suspension Crane can move clumsy, heavyweight workpiece in a fast manner. Available also with the mechanical electrical Chain hoist, hoist drive, electrical control device, and matched system, the crane requires limited maintenance and has a long service life.

This series of crane can run on both straight and curved rails. By using many other modular parts, it can be reassembled to become the single-girder or double-girder crane. Each of the modular parts is bored to the standard connector for its size. So the crane can be adjusted according to the layout of the worksite, in order to suit the specific material handling requirement and satisfy customer specific needs.

Optional Parts

Ÿ   Aluminum rail

Ÿ   Railway turnout

Ÿ   Elevating platform

Ÿ   Power supply device

Ÿ   Electrical travel drive system

Suspension Crane

Suspension Crane,Light Girder Suspension Crane,Light Crane,Suspension Overhead Crane

Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com