Egypt restarts HDP blow molding line E

<

According to reports, Egypt's Sidi Kerir Petrochemical Company (Sidpec) has restarted its high-density polyethylene (HDPE) blow molding line, but due to difficulties encountered during the restart, the device will not be put into commercial production until the end of the month. The production line is located in Ameriya, Egypt, with a capacity of 150,000 tons/year and closed on July 16 for a planned maintenance period of approximately one month. However, injection molding grade and film grade HDPE production runs successfully.
At present, the supply of HDPE in Egypt continues to be tight, but demand has declined since Ramadan began. One source said that the demand and price of HDPE during the two weeks before Ramadan were high, but there was a shortage of supplies.
At present, the price of HDPE in North Africa is 1250-1300 USD/ton (875-910 EUR/ton, CFR).
Due to local supply shortages, HDPE sold for up to US$2,000 (CFR Egypt). However, it has not been confirmed by the buyer.

The mixers are widely used in pharmaceutical, chemical, food, dye, feed, chemical fertilizer and pesticide industries and especially suitable for mixing various solid materials with large volume. The mixing barrel swings while rotates so that the materials in the barrel can be fully mixed. Because the discharge port of the barrel is out of the barrel centerline, the mixer features quick mixing and discharging as well as high volume mixing capacity.

Planar Motion Mixer

Planar Motion Mixer,Steel Planar Motion Mixer,Automatic Planar Motion Mixer,Stainless Planar Motion Mixer

Changzhou Jiafa Granulating Drying Equipment Co.,Ltd , https://www.jf-drying.com