Special Vehicle Tips: Sludge Picking Tips Â
Product Description:
Powder Transmission Spiral Conveyor, Screw
Conveyor
Spiral conveyor Application:
Spiral conveyor is widely used in various
industries, such as building materials, chemical industry, electric power,
metallurgy, mine, coal, grain etc.It applies to all kinds pf powder ,and small
block grannlar materials , such as pulverized coal , gravel , sand and lump
coal , cement , grains , etc ., does not apply to transfer easily degenerate ,
viscous large and easy to agglomeration of materials , Screw Conveyor working
environment temperature should be -20---+50°C range , the transportation of
materials temperature below 200°C, the largest dip 20°.
Screw Conveyor Material Transmission Spiral Conveyor,Powder Transmission Spiral Conveyor,Horizontal Screw Conveyor Tlss ,Spiral Screw Conveyor Dingzhou Yongsheng Grain & Oil Machinery Co.,Ltd. , http://www.oilpresschina.com
Special Vehicle Tips: Sludge Picking Tips
Don't try to combine the line when the suction truck is in a bend or turn. Because the body of the sewer car itself is in an unstable state, this instability will be exacerbated if the line is attempted. If the sewer truck is driving on a mountain road, it is especially necessary to avoid this situation.
If the curve is wide enough, you can follow the principle of “cutting outside and insideâ€, or you can call it outside and inside. The radius of the arc that passes through in this way is greater than the radius of the actual curve, that is to say a more sleek turn. The specific method of operation is:
1. Sewage suction truck If the vacuum suction truck is turning right, you can try to stick to the middle of the road before entering the bend, and stick to the roadside as much as possible in the bend. Of course, there is no non-motorized vehicle or pedestrian on the roadside. When you come out of the corner, you slowly drive to the right.
2. Sewage suction truck If the vacuum suction truck is turning left, you can stick to the roadside before entering the bend. When you enter the bend, you can stick to the middle. The premise is that there is no non-motorized vehicle or pedestrian on the roadside. At the corner, they leaned to the right again.
In short, when the sewage suction truck turns, when the situation permits, it is necessary to enlarge the turning radius angle as much as possible. The larger the radius is, the better, and the slower the speed is, the better the steering wheel is. In this way, it is possible to effectively reduce the sewage contained in the sewage suction truck because the inertia and centrifugal force are concentrated to one side, so as to ensure the stability of the vehicle body of the sewage suction truck and avoid the risk of side rollover.